Fraser's Hill SDLC Link Driver for Elite/400 Lan Gateway

Hardware Supported

     The LSXGG link driver supports FHL-7124, FHL-7135, FHL-7121,
     FHL-8124, FHL-8135, and FHL-8121.

Software Supported

     The LSXGG link driver supports the Elite/400 Lan Gateway.

Configuration

     Copy the files LSXGG.EXE and E400GLD.DAT to the Elite/400 Lan
     Gateway directory.

     Run the CFGE400G configuration program for Elite/400 Lan Gateway.
     Select the SDLC connection.  Select the Fraser's Hill High Speed
     SDLC Adapter.  There are no other changes to the standard
     configuration procedures.

     Most high speed modems or DSUs support full duplex (constant RTS)
     on point to point connections.  To enable the full duplex option
     in LSXGG.EXE add the /F parameter to the LSXGG line in the load
     batch file.
          LSXGG /3 /F

Miscellaneous

     The FHL adapter board uses two 16K blocks of PC memory.  It is
     necessary to exclude this memory from use by expanded memory
     managers and other programs.  The following examples for EMM386
     use the default board switch settings.  Note: multiple exclude
     entries are allowed.

     before:
          DEVICE=C:\DOS\EMM386.EXE NOEMS X=C000-C7FF
     after:
          DEVICE=C:\DOS\EMM386.EXE NOEMS X=C000-C7FF X=D000-D7FF