Fraser's Hill SDLC Link Driver for AdaptSNA

Hardware Supported

     The SDLCG link driver supports FHL-7124, FHL-7135, FHL-7121,
     FHL-8124, FHL-8135, and FHL-8121.

Software Supported

     The SDLCG link driver supports AdaptSNA 3270, AdaptSNA APPC,
     AdaptSNA LU0, AdaptSNA RJE, and AdaptSNA Lan Gateway

Configuration

     Copy the file SDLCG.EXE to the emulation directory.

     Run the configuration program for the required AdaptSNA product.
     Select the SDLC connection.  Select hardware code G for the
     Fraser's Hill Coprocessor adapter.  There are no other changes
     to the standard configuration procedures.

     Most high speed modems or DSUs support full duplex (constant RTS)
     on point to point connections.  To enable the full duplex option
     in SDLCG.EXE add the /F parameter to the SDLCG line in the load
     batch file.
          SDLCG /F

Miscellaneous

     The FHL adapter board uses two 16K blocks of PC memory.  It is
     necessary to exclude this memory from use by expanded memory
     managers and other programs.  The following examples for EMM386
     use the default board switch settings.  Note: multiple exclude
     entries are allowed.

     before:
          DEVICE=C:\DOS\EMM386.EXE NOEMS X=C000-C7FF
     after:
          DEVICE=C:\DOS\EMM386.EXE NOEMS X=C000-C7FF X=D000-D7FF